SA Feldherrnhalle Grip. Unused, medium brown, fine gained wooden grip has three tiny "worm" holes in surface, but no cracks, chips or surface depressions. RARE part!

• Near MINT (23931A) PRICE ON REQUEST
• Unfinished grip has been roughly shaped and routed to fit crossguards and blade tang. Requires final finishing and fitting, but no cracks or damage. Near MINT (23931B) PRICE ON REQUEST
  

Original Early SS Dagger Grip. Black wooden grip shows minor surface wear, but no cracks or chips, and is complete with silver grip eagle and SS enameled insert properly inset. Nice early ebony grip. EX++/Near MINT. (25332) $595. SOLD

ORIGINAL UNCUT Block/Section of Ebony. Unused, ORIGINAL block of Ebony measuring 10 ¾" long x 1 ¾" wide tapering to 1" wide and ½" thick grades MINT and would be ideal for SS grip repairs. MINT/Unused (24871) $135.

SA/SS/NSKK Pommel Nut.

• Exc. Steel, unplated (10856) $12.50@

Unattributed Political Dagger-Style Pommel Nut.
Gilted brass pommel nut features notched border with raised swastika in center. Several sizes available. MINT, Unissued (17493) $75.@

SS/SA/NSKK Upper Crossguards. Unissued, plated upper crossguards were recently obtained from the remaining inventory of the Paul Seilheimer Firm. Crossguards show only light age with no lifting to plating and are available internally.

• Caster marked "P" and "A". Near MINT (23923A) $58.@
• Unmarked. Near MINT (23923B) $58.@

SA/SS/NSKK Grip Eagle.

• MINT (Aluminum, for use w/RZM-marked daggers) (5842) $35.

SS Enameled Grip Insert. Black enamel insert w/SS runes is complete with attaching shaft. MINT (25722) $95@.

SA/NSKK Enameled Grip Insert.
MINT (4581) $28.50@

Post-War Production SA/SS Honor Dagger Crossguards.

• Exc++ (Lower crossguards only) (23565) $40.@ ALL GONE
  

NPEA Crossguards.

• SOLD MINT (Aluminum, unmarked for NPEA dagger) 18962A – 2 sets available) $150./Set
  
• MINT (Aluminum, unmarked for NPEA dagger, UPPER ONLY) (18962B - 3 available) $75.@

NEW!Army Officer Dagger Crossguard.Nickel-silver, "generic" crossguard shows light wear/age patina and features the eagle that is similar to the crossguard produced by the R. Herder Firm. EX+ (26214) $185.

Gold Army Officer Dagger Pommel.
Gilt pommel for gold Army (General Officer) dagger is properly threaded. Rare part! MINT, Unissued (16096) $195.

Army Officer Dagger Pommel.

• MINT (Unissued, silver) (7153) $42.50@
• MINT (Unfinished, late-war, pot-metal, threaded) (11596) $18.@
• MINT (Unissued, miniature, late-war, threaded) (13528) $12.@

Army Officer Dagger Ivory Grip. These period, unissued genuine ivory grips were recently obtained in Germany and are leftover Third Reich era stock. Grips are perfect with no cracks or surface damage, and show nice age striation. Since these grips are handmade, they may require additional work to obtain proper tang and pommel fit. MINT (22358) $895.@

Army Officer Dagger Grip Ferrule.
MINT, Unissued (Early, heavy silver w/deep, hand-enhanced oak leaves) (18076) $25.@ Exc+ $15.@

Miniature Army Officer Dagger Pommel.
Small, gray metal crossguard for Hörster and Eickhorn piece. Will not fit Alcoso dagger. MINT (18047) $15.@

55cm DLV Flyer’s Dagger Grip.
MINT, Unissued Blue leather over metal base. (19519)

• MINT ( With wire wrap) (19519A) $275.
• MINT/Unissued (Without wire wrap over wooden base) (23990) $250.
• MINT ( Without wire wrap) (19519B - 2 available) $250.@

.Used, early nickel-silver hanger shows only light wear/age patina and features 9 upper and 12 lower rings w/connectors and lower attaching links. Upper spring clip is unmarked. EX++ (25428) $295.

Miniature 1st Model Luftwaffe Dagger Pommel.
Unissued (Pot-metal, with swastikas) (13529) $12.@

1st Model Luftwaffe Dagger Grip Ferrule.
MINT (6154B) $15.@

1st Model Luftwaffe Dagger Crossguards.

• MINT (Unfinished, aluminum w/o swastikas) (11599) $20.

Miniature 1st Model Luftwaffe Crossguard.
No plating or gilting. Small crossguard for Hörster and Eickhorn daggers. MINT (11774) $25.@

2nd Model Luftwaffe Ivory Grip w/Wire. These period, unissued, genuine ivory grips were recently obtained in Germany and are leftover Third Reich era stock. These grips are perfect with no cracks, chips, or surface damage, and show nice age striation. Since these grips are handmade, they may require additional work to obtain proper tang and pommel fit. MINT (21874) $895.@

2nd Model Luftwaffe Dagger Grip w/Wire.

• MINT (Yellow solid celluloid) $75.@
• MINT (White celluloid, WITHOUT WIRE) $40.@

Miniature 2nd Model Luftwaffe Dagger Grip.

• Large Alcoso size light celluloid grip is perfect and is complete w/tight twisted wire wrap. Grip has not been fitted to tang. MINT, Unissued (21257) $140.

• These large, Alcoso size solid celluloid grips without wire wrap have not been fitted to tang. MINT, Unissued (DARK ORANGE - 20539A - 1 available) (LIGHT YELLOW - 20539B - 1 available) $125.

NEW! 2nd Model Luftwaffe Pommel, Ferrule & Crossguard. SOLD
Aluminum fittings show surface wear with much factory darkening remaining in the recesses of the Carl Eickhorn style heart-shaped pommel and crossguard with Eickhorn style incised oak leaves on the upper quillon arms. These difficult to obtain original parts were removed from a veteran acquired Eickhorn 2nd Model Luftwaffe dagger. EX++ (25690) $195.

2nd Model Navy Dagger Pommel. Leftover stock from Clemen & Jung firm. MINT (5475) $110.@

Miniature 2nd Model Navy Dagger Pommel. Leftover WWII stock brass pommel fits the smaller 7 ¾" miniature dagger. Threaded pommel shows dark age patina. Exc+ (20359) $25.@

1st/2nd Model Navy Dagger Ivory Grip w/Wire.

• MINT (Nice age striations, no chips, one small hairline crack) (21875A) $625.
• Exc++ (two small hairline cracks on upper end) (19496B) $595.

2nd Model Navy Dagger Crossguard w/o Release Button. These original, gilted, solid brass crossguards from the Paul Seilheimer Firm show superb detail to the fouled anchor quillon block with no wear to the gilting. Crossguards were not intended to have release buttons. Only a few available. MINT/Unissued (23896) $125.@

Navy Dagger Crossguard Release Button. One-piece, brass construction designed for use with slotted crossguards. Only a few available. MINT (24586) $30.@ ALL GONE

Miniature 2nd Model Navy Dagger Crossguard. Leftover WWII stock brass crossguard fits the smaller 7 ¾" miniature dagger. Crossguard shows dark age patina with a small portion of flashing remaining on one quillon which will require some finishing. Exc+ (20360) $35.@

2nd Model Navy Administrative Dagger Crossguard.
Aluminum crossguard is complete with tang spring release button. Rare part. MINT (18407) $145.

RAD EM Hewer Hilt. Silver-plated aluminum hilt shows light age patina, has not been drilled for grip plate screws and is internally numbered, "38". Near MINT (20362) $250.

RAD EM Grip Screws.
Original leftover Solingen stock.

• MINT (w/taps) (6672) $10.@
• MINT (w/o taps) (6672) $5.00@

Hitler Youth Leader Dagger Pommel.

• Near MINT (Silver plated, dark age patina, hollow/designed to fit over grip) (15964 - 3 avail.)
• $225.@ Exc++ (Silvered aluminum, age toning, early/threaded to screw on tang) (12819) $195.

Hitler Youth Knife Grip Plates.
Leftover WWII stock. Plates do not include HJ grip emblem. Sold in pair.

• MINT (w/2 grip rivets) (14349) $38.50./Pr.
• MINT (w/o grip rivets) (10802) $30./Pr.

Hitler Youth Knife Grip Plate Rivets.
Leftover WWII stock. Aluminum rivets are sold in pairs. MINT (10848) $8./pr

DJ Knife Grip Plates. Leftover Solingen stock. Plates DO NOT include DJ grip emblem. (20353)

• MINT (w/2 grip rivets) $39./Pr.
• MINT (w/o grip rivets) $30./Pr.

1st & 2nd Model RLB Officer Dagger Pommel. Silver-plate over brass pommel shows only minor storage wear/age and is properly threaded for tang. Four available. Near MINT/Unissued (21017) $85.@

RLB EM Dagger Pommel.
Nickel-plated pommel shows surface wear and some crazing to plating. Has been used and is properly threaded for the tang. Identical to those used on Postal daggers.

• MINT (Unissued, polished aluminum w/proper threads) (18554 - 5 available) $65.@

1st & 2nd Model RLB EM Dagger Grip.
Grips are drilled but not fitted to tang, w/o grip emblems.

• MINT (14147 - 4 available) $125.@

TENO Officer Dagger Grip.
Solid yellow celluloid grip. Leftover Carl Eickhorn stock. MINT, Unissued (5838) $95.@

Land Customs Dagger Pommels.
Aluminum construction; leftover Solingen stock.

• MINT, Unissued (UNFINISHED--Pommels have not been threaded, casting marks are present and oak leaves show poor definition. (13299) $45.@

Water Customs Dagger Grip Ferrule.
Gilted aluminum construction; low definition to oak leaves; leftover Solingen stock. Near MINT (16868) $45.

1938 Bahnschutz Leader Dagger Crossguard.
Aluminum crossguard. Shows good definition.

• MINT (Polished aluminum, leftover E. & F. Hörster stock) (2 available) $250.@
• MINT (Not completely finished nor buffed out) (13532) $135. ALL GONE

ALL GONE***Postal Leader Dagger Grip Insignia

• MINT, Unissued (Unfinished, nickel-silver, w/o attaching pins on back) (11436) (17622) $245.@

Deluxe Forestry Dagger Hilt w/Eagle & Swastika.
Aluminum hilt has not been gilted. Features eagle and swastika on ferrule.

• MINT (Clamshell only, gilted) (11558) $135.

Senior Forestry Dagger Grip Plates. Off-white, solid celluloid grip plates with reverse attaching pins are original leftover Solingen stock and were recently obtained in Germany. Plates show only minor surface wear with faint indication on obverse plate where oak leaf/acorn emblem was once attached. Sold only in pairs. Near MINT (23122 - ALL GONE)

Senior Forestry Dagger Grip Plates.
White celluloid grip plates are leftover Solingen stock. Sold in pairs only.

• MINT (With celluloid pegs) (12860) (14351) $145.@

Subordinate Forestry Dagger Grip Plate. Obverse dark stag horn grip plate is perfect with no cracks or chips and has been drilled for three retaining pins/acorns. Reverse side is marked, "8". MINT, Unissued (20372) $75.

Forestry Dagger Grip Wooden Backing Plate. Wooden plates were glued to back of Forestry grip plates and used to attach plates to hilt. Three obverse backing plates and one reverse plate available. MINT, Unissued (20373) $10.@

Hunting Hirschfanger Clamshell. Standard gilted brass, fluted clamshell is stamped "F.W.H." (F. W. Holler) and "390". Minor storage wear/age. Near MINT/Unissued (20698) $50.

Forestry Dagger Clamshell.
Unplated aluminum with stag head. MINT, Unissued (20720) $30.@

Hunting Dagger Pommel Nut.

• MINT/Unissued (Brass, unadorned, dome-style, pommel nut is threaded for attachment to blade tang) (24584 - 3 available) $20@.
• MINT, Unissued (Brass stylized acorn pommel nut is threaded for attachment to blade tang. Rare part! (17494 - 6 available) $20.@

Hunting Dagger Pommel.
Solid brass fluted pommel is correct for standard model Hunting daggers. MINT (17700) $40.@

Third Reich Hunting Hïrschfänger Stag Horn Grip Emblem.
Silver insignia retain 100% of the factory darkened finish to the elk head with swastika and are complete with single reverse attaching shaft. MINT, Unissued (22368) $95.@

Forestry/Hunting Dagger Grip Acorns.
Leftover Solingen stock.

• Silver (w/oak leaves - 3 remaining) MINT $20.@
• Silver w/o oak leaves (MINT) $25.@

Deluxe Third Reich Hunting Association Dagger Pommel Cap.
Oak leaf embellished pommel caps are original leftover E. & F. Hörster wartime stock.

• MINT (Polished aluminum) (17963) $35.@

Hunting Hirschfanger Crossguard/Clamshell. Gilted brass recurved crossguard is stamped "F.W.H." (F.W. Höller) and "305" while gilted fluted clamshell is stamped "FWH" and "398". Minor storage wear. Nice, original, maker-marked set. Near MINT/Unissued (20740) $125.

Forestry Hirschfänger Clamshell. Although unmarked, an illustration of this pattern clamshell appears on page 22 of the 1941 Höller Sales Catalog on the hilt of the Model Nr. 36, Hirschfänger für Förster. Polished brass clamshell features a raised standing stag head within a forest background. MINT (24588) $65.SOLD

Rifle Association Dagger Clamshell Emblem.
Original, silvered "Deutscher Schutzen Verband" emblem with eagle/shooting target in center are complete with proper pins for attaching to obverse clamshell. Rare original leftover Solingen part offered for the first time! Only a FEW available.

• MINT, Unissued (17602) $135.@ All Gone

Royal Danish Navy Dagger Grip.
Round, medium orange celluloid with two lower and four center narrow bands. Unissued with minor surface wear. Near MINT (17387) $75.@

Third Reich Fire Axe Handle Fittings.
Nickel-plated fittings are leftover E. & F. Hörster stock. The following fittings are available in Near MINT, Unissued condition (18075):

• Suspension Rings w/attaching metal disc (8 avail) $60.@
• Presentation Plaque (2 avail) $60.@
• Lower Fitting (3 avail) $60.@
• Complete Set $150.@

Imperial Fire Official Dagger Crossguard.
An example of this cast brass crossguard is shown on page 223, left, of Collecting the Edged Weapons of Imperial Germany by LTC (Ret.) Thomas Johnson and Thomas Wittmann. Excellent detail to rectangular quillion block and spearhead-style quillions. MINT (17390) $85.@

Imperial Fire Official Dagger Crossguard. See page 220, left, of Collecting the Edged Weapons of Imperial Germany for an example of this Eickhorn pattern silver crossguard with cloverleaf quillons. Near MINT (20393) $65.

Imperial Navy Dagger Pommel.
Gilted brass pommels are threaded and completely finished.

• Post-War Imperial (Open Crown) (9547) $110.@

Unfinished ¾ Size Imperial Navy Dagger Crossguard. Cast brass crossguard with fouled anchor motif on quillon block and large capstans was designed to fit the Formal Mess Dirk as pictured on page 59, far right, of Collecting the Edged Weapons of Imperial Germany. Quillon would require drilling to accept the blade tang and final polishing. Light age patina. Rare original part! Exc++ (21442) $75. SOLD

Third Reich Lion Head Sword Pommel/Backstrap. A photograph of a similar pattern lion head sword pommel/backstrap appears on page 107, lower, of Swords of Germany 1900/1945 by John R. Angolia. Gilted brass fitting is complete with red glass eyes. One available. MINT (20733) $75.

Third Reich Lion Head Sword Pommel/Backstrap. A photograph of a similar sword pommel with pronounced lion head appears on page 73, lower, of Swords of Germany 1900/1945 by John R. Angolia. Heavily chased silver fitting with oak leaf embellished backstrap is pattern without glass eyes. Two available. MINT (20736) $65.@

E. Pack & Söhne Dove Head Sword Pommel/Backstrap. A photograph of this pattern dove head pommel/backstrap appears on page 110, upper right, of Swords of Germany 1900/1945 by John R. Angolia as E. Pack sword model Nr. 204. Gilted brass fitting features engraved oak leaves and acorns. Exc++ (20741) $50.

Paul Seilheimer Third Reich Dove head Sword Hilt Assembly.
An example of this hilt is shown on p. 122, top, of Angolia's Swords of Germany 1900/1945. Fittings are hand-chiseled, gilted brass.

• MINT (Backstrap, knuckle-bow/crossguard (closed wing eagle), ferrule) (13052 - 4 avail.) $135./set
• MINT (Backstrap and ferrule only (13053 - 2 sets available) $40./set

Paul Weyersberg Third Reich Knuckle-Bow/Crossguard Assembly. A photograph of this unusual Army lion head variation appears on page 149, upper right, of Collecting the Edged Weapons of the Third Reich, Volume I. Polished aluminum assembly features heavily oak leaf embellished knuckle-bow and quillon with acorn tip and large combination langet/ferrule with closed wing Wehrmacht eagle and swastika. This model sword hilt is also prominently displayed on the Third Reich Max Weyersberg factory sales catalog. Rare part. Three available. MINT (20734) $135.@

Paul Weyersberg Third Reich Knuckle-Bow/Crossguard Assembly.
An example of this gilted aluminum, floral pattern knuckle bow/crossguard is shown on page 130 of Swords of Germany 1900-1945 by John Angolia as a Weyersberg unattributed model. MINT (17206) $135.

Third Reich Army Sword Grip.

• Unissued MINT (Black celluloid-over-wood w/wire wrap) (13055) $95.@
• MINT (Black celluloid-over-wood w/o wire wrap) (13054A) $75.@
• MINT (Solid black celluloid w/o wire wrap) (13054B) $75.@

Puma "Hausmüster" Factory Sample Sword Hilt. These sword hilts, recently obtained in Germany, were produced by the Puma-Werke, Lauterjung & Sohn Company, and are complete with puma head inside diamond TM, black celluloid grips with wire wrap, black buffer pads, and 5" of the plated blade with rounded tip. Blades are engraved with the Puma sword pattern number. See pages 192-193 of Volume I of Collecting the Edged Weapons of the Third Reich for examples of factory sample sword hilts. The following sword hilts are available:

A. Army Lion Head Sword Hilt Pattern No. 5. Gilted brass hilt fittings show only faint wear with virtually 100% of the factory fire gilting remaining to both highlights and recesses of the lion head pommel with red glass eyes, heavily-chased oak leaf backstrap, knuckle-bow and ferrule, as well as open-wing eagle with hand-enhanced features on obverse langet. Underside of crossguard is "Ges.Gesch" marked. Black celluloid grip is perfect with no cracks or chips and with tight twisted triple wire wrap. Plated, 5" portion of blade grades excellent+ / excellent++, with light age, one speck of lifting, is double marked with Pattern "No. 5", and complete with brown leather blade buffer pad. An example of this pattern langet eagle appears on page 116 of Swords of Germany 1900/1945 by LTC John R. Angolia. Superb example! Near MINT (20419A) $550.

C. Army Dove Head Sword Hilt Pattern No. 33. Gilted brass hilt fittings show only faint wear with virtually 100% of factory gilting remaining to both highlights and recesses of heavily-chiseled oak leaf pommel, knuckel-bow and ferrule, as well as closed-wing Wehrmacht eagle on obverse langet. Black celluloid grip is perfect with no cracks or chips and with tight twisted triple wire wrap. Plated 5" portion of blade grades excellent++ showing only light surface age, is marked, "No. 33", and complete with brown leather blade buffer pad. An illustration of this sword hilt appears on page 117, right, of Swords of Germany 1900/1945 by LTC John R. Angolia. Superb example! Near MINT (20419C) $550.

Army Sword Grip Ferrule.
Features oak leaves in gilt or silver. MINT (6580) (12637) $18.@

Army Sword Hilt Eagle.
Wehrmacht pattern eagle w/attaching pins was used by WKC on the langets of Army Officer sword patterns Nr. 29/A and Nr. 1025 and was available in silver or gilt. Rare part!

• MINT, Unissued (Silver – 19342) $75.

2nd Model Luftwaffe General Officer Sword Grip.

• MINT (white celluloid grip w/correct grooves to fit sword(w/o wire) (17391) $250.@

Luftwaffe Sword Grip.

Grip features perfect, professionally recoverd blue leather, over wooden base with double-twisted silver wire wrap. Leather has perfect seam and matches exactly the color and quality of period covered grips.
MINT (25429) $335. SOLD

RARE DLV Sword Pommel Disc.

• A. Perfect gilting to swastika. (20396A - 2 available) $75.@
• B. Age to gilting on swastika. (20396B - 2 available) $65.@

Luftwaffe Sword Crossguard.

• Exc+ (Silver w/light wear and gilted swastikas) (19080) $55.
• MINT (Aluminum construction) (5647) $45.

Unfinished Luftwaffe Sword Crossguard.

• MINT (aluminum construction w/o gilting to swastikas) (11605) $35.@
• MINT (unplated brass w/o swastika disc) (15867) $30.@

Navy Sword Backstrap.
Gilted brass backstrap features Lion head pommel.

• MINT, Unissued (red/green glass eyes) (19500) $150.
• Unissued (w/o glass eyes) (14809 - 3 available) $135.@

Third Reich Navy Sword Hilt Fittings. Cast brass hilt fittings show light surface wear/age patina to the knuckle-bow (stamped "134"), obverse folding guard (stamped "401") and rear folding guard (stamped "148"). Fittings appear to be Eickhorn pattern Nr. 1670. Fittings need proper folding guard hinges to replace the temporary wire hinges currently in place. Exc++ (20374) $195.

Third Reich Navy Sword Hilt Handguard.
Cast brass handguard with fouled anchor motif has not been gilted but shows excellent detail to casting. Exc++ (17389) $95.@

ALL GONE-Unfinished SS Officer Sword Grip. Natural light brown wooden grip has been properly grooved for wire and routed for tang, metal backstrap and SS Runes insert. Grip has not been dyed black and is without wire and SS Runes insert. MINT (22949) $285.

ALL GONE-Post-War SS Officer Sword Grip Runes Insert.
Silver metal insert is properly curved with gray background frosting but without retaining pins. Rare replacement item often missing on original SS swords. MINT (17084) $150.@

All Gone SS/Police Sword Hilt. Nickel-silver hilt is comprised of upper ferrule, knuckle-bow and crossguard.

• Exc+ (Nickel-silver construction, minor age/wear; no SS markings) (21187A) $125.
  
• Exc+ (Postwar plated brass; no SS markings) (21187C) $45.

Police Officer Sword Grip. Black wood construction.

• MINT/Unissued (Grip has been routed & drilled for tang. Complete w/silver wire & Police grip properly inset. Grip may require additional fitting) (24538) $175. Sold
• MINT (with silver grip eagle, no wire) (14352- 2 available) $135.@

Imperial Army Sword Grip.

• MINT (Sharkskin-over-wood w/o wire wrap) (11785) $65.@
• MINT (Black Bakelite, simulated sharkskin w/o wire wrap) (11785 - 2 avail.) $65.@
• MINT (Black Bakelite w/wire wrap) (11785 - 4 available) $95.@
• MINT (Black Bakelite w/o wire wrap) (11785) $65.@

Imperial Navy White Sword Grip.
Unissued.

• MINT (Sharkskin-over-wood w/o wire wrap) (14361) $45.@
• MINT (Celluloid, simulated sharkskin w/o wire wrap) (14361) $45.@
• MINT (Celluloid-over-wood w/o wire wrap) (9804) $45.@
• Exc+ (Celluloid-over-wood w/wire wrap) (9804) $65.

Imperial M-89 Infantry Degen Hilt Fittings. Blued steel fittings show surface wear/crazing to bluing on plain pommel cap, pommel, knuckle-bow and crossguard with folding clamshell with Imperial eagle/cipher. Upper crossguard is stamped, "15". VG+/Exc. (20370) $165.

Imperial M-89 Infantry Degen Hilt Fitting.
Black enameled brass pommel shows light wear to enamel. Exc++ (21194) $35.

Imperial M-89 Infantry Degen Knuckle-Bow/Crossguard. Blued steel knuckle-bow/crossguard with folding clamshell with Imperial eagle/cipher shows surface wear/crazing to bluing. Upper crossguard is stamped, "24". Two available. VG+/Exc. (20371) $90.@

Imperial M-89 Sword Grip Wire.
Single strand, twisted silver wire shows dark age patina. Due to the various sizes of Imperial sword grips, please provide an estimated length of replacement wire needed. MINT, Unissued (19039) 5-Ft. $20.@ 8-Ft. $25.@

Imperial Sword Grip Cyphers. "WRII w/crown" cyphers.

• Anodized steel, unissued, w/attaching prongs (12634B) $28.50@

M-89 Degen Handguard. Used cast brass handguard with Prussian eagle shows wear and age patina with portions of gilting remaining in recesses. Exc. (20387) $30.

Simulated Staghorn Bayonet Obverse Grip Plates.
Wood grip plates are carved to simulate staghorn and are covered with 50+ years of grime from storage at the Hörster firm. Grip plates have not been drilled for screws. OBVERSE ONLY. (17229 - 4 available) $15.@

KS/98 Bayonet OBVERSE Grip Plates. Unissued, black Bakelite OBVERSE grip plates were recently obtained from the remaining inventory of the Paul Seilheimer Firm. Grip plates are perfect with no wear or damage and are drilled for standard rivets (not off set for E. Pack rivet placement). OBVERSE plates available. MINT (23924) $10.@

Third Reich Bayonet Grip Plate Rivets. Nickel-plated rivets are original leftover stock recently obtained in Germany. Sold in pairs only. MINT (20224) $10./Pr.

Third Reich Slotted Police Bayonet Hilt. These original Police Bayonet hilts were recently obtained in Germany from the inventory of the Paul Seilheimer Firm. Nickel-plated hilts show superb detail to the feathering on the eagle head pommel as well as the oak leaf motif on the crossguard. Obverse spine (covered by grip plate) is caster marked "E.W.S." (probably Ernst Wagner Solingen"). The following hilts and hilt parts are available:

• A. Hilt complete with operable lug nut/spring. MINT/Unissued (23897A) $65.@
• B. Hilt without operable lug nut/spring. MINT/Unissued (23897B) $45.@
• C. Lug nut/spring only. Lug shaft and locking nut are Waffen amt marked. MINT (23897C) $25.@

Gilt Police Grip Eagle.
Gilt eagle is without attaching pins and has some casting flashing attached. Suitable for Water Protection Police dagger or gilt Police bayonet. Rare part offered for the first time by JRB! MINT, Unissued (17042) $125.@

Late-War Police Bayonet Grip Eagle.
Late-war, gray metal, solid construction grip eagle features two attaching pins on the reverse. Available with needle or flat pins--PLEASE SPECIFY. Examples of this style eagle are pictured on pages 100, 106, 107, and 109 of German Clamshells and Other Bayonets by G. Walker and R. Weinand. Rare part! MINT, Unissued (16859) $45.@

Bayonet Slot Felt Plug.
The bayonet slot on Dress bayonets was normally fitted with a colored felt plug. The color of the felt plug was associated by specific type units in the German military and para-military organizations. The following original felt bayonet plugs are in MINT condition. $5.50@ or 6/$30.

• Red (Wehrmacht (Armed Forces), FLAK, Police units)
• Green (Jager Formation, Police units)
• Golden Yellow (Aviation formations)
• Light Green (Aviation Supervisory troops)
• Brown (Aviation Communications troops)