Personalized SS High Leader Honor Dagger Scabbard. Dent-free steel shell features perfect black recovered leather with German silver scabbard throat, upper and lower scabbard fittings showing light surface wear. Scabbard fittings are routed on front and back with correct fixed scabbard throat section with much factory darkening remaining in routed fittings. Reverse upper fitting is personalized in jeweler-engraved script letters, "Fr. Brandenburg M78". Scabbard fittings show light surface wear with a few faint depressions to upper and lower fittings and some minor surface scratches. Rare personalized SS Honor scabbard! Exc++ (21149) $9,995.

NEW! SS Oak Leaf Motif Honor Scabbard. This MINT SS Honor Scabbard was assembled from original parts in the early 1990's and is correct in every detail. Black, grained leather shell is perfect with no wear or damage and is correctly "butted" to the upper and lower scabbard fitting edges, but no beneath them. The upper and lower nickel-silver scabbard fittings are MINT with no wear to the highlights or to the factory darkening in the recesses of the raised oak leaf motif. Normally no scabbard retaining screws are used on these scabbard fittings, as the fittings are stamped as part of the shell. However, a shown on pages 285 and 286 of Exploring The Dress Daggers and Swords of the German SS by Thomas T. Wittmann this scabbard has upper screws to secure the scabbard throat as well a lower screws to give the "fittings" a uniform appearance. MINT/Unissued (25813) $5,000.

Early SS High Leader Honor Dagger Scabbard.
All parts on this post-war assembled scabbard are original, to include the oak leaf embellished nickel-silver fittings, scabbard body, and fine grained black leather. Superb workmanship by Solingen craftsman and longtime employee in the German edged weapons industry. One available. MINT (19503) $4,995.

Early SA High Leader Honor Dagger Scabbard.
Carl Eickhorn TM. Fine grained brown leather is pristine MINT as are the oak leaf embellished upper and lower nickel-silver fittings. See page 135 of Collecting the Edged Weapons of the Third Reich, Vol. IV, for a comparison of the early and later (chained) version of the SA High Leader scabbards. MINT (15225) PRICE ON REQUEST

Early SA High Leader Honor Dagger Scabbard. Dent-free, brown leather covered shell features MINT German silver scabbard throat and upper & lower scabbard fittings. Scabbard fittings are routed on front and back with correct thick scabbard throat section and covered with dark age patina. Scabbard is complete with original metal assembly tag stamped, "11" and wired to the scabbard ring. Only ONE available! MINT (20213) $6,995.

SA High Leader Scabbard with Post-War Chain.
Original brown leather scabbard has nickel-silver upper, center and lower fittings, which show light age patina. Nickel-silver, post-war chain (made from original dies) contains 5 upper and 7 lower links with correct clip with SA insignia. A beautiful MINT specimen of a rare scabbard. MINT (15870) $5,500.

SA High Leader Scabbard.
All parts on this scabbard, including fittings, scabbard body and leather, are original war- time production. Piece was post-war assembled by a German craftsman, who was an employee of the Solingen firms during the Third Reich era. Routed fittings retain much of the original black burnishing in the recesses. Much of the protective lacquer remains on the fittings themselves. Scabbard leather is MINT. Only ONE available! MINT (11595) $4,995.

SA High Leader Scabbard Shell.
Scabbard shell is minus the original leather and upper and lower fittings. Scabbard is tapped for the center scabbard band. This item was vet obtained and is 100% original. VG (8492) $575.

SA Honor Dagger Scabbard Shells.
Scabbard comes in two halves which have not yet been braised together and features the scabbard fittings as an integral part of the scabbard shell itself. Fittings feature the oak leaf and acorn pattern (see page 39 of Volume I of Collecting the Edged Weapons of the Third Reich). Nickel-silver construction. MINT (10395 - 2 Pr. remaining) $950./Pr.

SPECIAL. Original Leather-Covered Scabbard Shells for SA High Leader Dagger. Original High Leader scabbard shell wrapped in rich, brown leather from the Eickhorn wartime stock. Only TWO available. MINT, Unissued (6835) PRICE ON REQUEST

1938 Pattern SA High Leader Dagger Scabbard Fittings.
Nickel-silver fittings are original leftover stock and are properly routed. (18042)

• MINT (center, early, w/o ramp) $350.
• MINT (center fitting) $350.
• Exc+ (center fitting shows surface wear/age) $295.@
• MINT (lower fitting has not been tapped for screws) (3 available) $250.@
  

SA Feldherrnhalle Scabbard Shells. Scabbard comes in two aluminum halves which have not yet been braised together, and feature the unique Feldherrnhalle pebbled panels and integral stamped lower fitting. Three pairs available. MINT, Unissued (21896) $595./Pr.

SPECIAL. Original Leather-Covered Scabbard Shell for SS/NSKK Honor Dagger. Original SS/NSKK Honor dagger scabbard shell wrapped in rich, black leather from the Eickhorn wartime stock. MINT (4725 - few available) PRICE ON REQUEST

SA/SS/NKK Scabbard Shells. These original untapped scabbard shells are complete with original period paint, but WITHOUT fittings.

• Exc++/Near MINT (SS/NSKK, original black anodization shows minor surface wear) (22950) $175.@ ALL GONE
• Near MINT (SS/NSKK, original black enamel factory paint, not completely buffed out) (19697B) $125.@
• Near MINT (SA, original brown enamel factory paint) (19697A) $85.@
  

SA/SS/NSKK Unfinished Scabbard.
These original steel scabbard shells are in two pieces (prior to welding). Unpainted. FEW sets available. MINT (13977) $75./Set

SA/SS/NSKK Scabbard Fittings.

• MINT (scabbard rings; plated) (12210) $8.@
• Exc++ (upper fitting w/ring; plated) (11597) $28.@

SA/SS/NSKK Scabbard Screws.

• MINT (upper, nickel-silver) $5.@
• MINT (upper (short); unplated) (3017) $4.@
• MINT (Lower (long); unplated) $4.@
  

Metal Runner Retaining Rivets.
MINT, Unissued Small rivets for attaching scabbard runners to throat $4.@

Marine NSKK Scabbard Screws.
Gilt. MINT (11426) $8.@

NPEA Leader Scabbard Fittings.

• Near MINT (upper; ramp-type; nickel-plated) (13437) $55.@ ALL GONE

Army Officer Dagger Scabbard.
Unless otherwise stated, all scabbards are silver plated over steel and complete with two oak leaf scabbard bands with rings.

• Near MINT (Dent-free, no loss of plating, reverse, center-mount screw) (24071A - 2 avail) $225.@
• Near MINT (Tiny depression to tip, no loss of plating, reverse center-mount screw) (24071B) $220.
• EXC++ (Dent free, no loss of plating, two side-mounted screws; missing lower suspencion band) (25199) $165.
• EX++ (Dent-free, minor age speckling, 2 side-mounted screws) (25692 1-avail) $210.
  
  

Army Officer Dagger Scabbard Shell.
Scabbard shell is in two halves which have not been soldered together and are complete with standard pebbled pattern. Have not been silvered. Scabbard can also be used for Diplomatic/Government Official dagger. MINT (17231) $75./Pr.

Army Officer Dagger Scabbard Fittings.

• MINT (Upper, nickel - 2 available) $14.@
• MINT (UNSILVERED, brass lower bands w/rings) (20449) $14.@
• MINT (Unfinished bands; upper & lower; brass construction; not drilled for rings) (11773-ALL GONE) $10.@
  

Miniature Army Officer Dagger Scabbard Stamping Die.
This original stamping die was obtained from a relative of the owner of the Paul Seilheimer factory. 2-piece steel stamping die for production of miniature Army dagger scabbard approximately 5 3/4" in length. Die is hand-lettered in white paint, "EF. Nr 186, Dolchscheide EF 186, HEER". Exc+ (18151) PRICE ON REQUEST

NEW! 1st Model Luftwaffe Scabbard w/Hanger.Blue leather covered scabbard shell shows only minor age with no scuffs, rips, tears or damage to seam. Dent-free, aluminum upper, center and lower fittings show minor surface wear with a spot of oxidation to the reverse upper fitting, but no damage to the unturned retaining screws. Aluminum hanger with 6 upper and 8 lower rings shows minor age, but no damage to rings or connector and is complete with unmarked, pebbled aluminum clip. EX++ (25788) $585.

1st Model Luftwaffe Dagger Scabbard Shell.
Blue leather/metal liner. MINT $140.@

1st Model Luftwaffe Dagger Scabbard Leather.
Blue leather, enough to cover one 1st model Luftwaffe dagger. $65.@

Miniature DLV/1st Model Luftwaffe Dagger Scabbard.

• MINT (blue leather/silver fittings) (8292) (10200) $175.@
• MINT (stippled blue metal/silver fittings) (9716) (9806) $145.@
• MINT (Unfinished, no leather or paint on scabbard body, unpolished fittings) (18875) $65.
  

DLV Dagger Upper Scabbard Fitting.
Nickel-silver fitting is the longer type found on the DLV Flyer's dagger by Adolf Braun. See page 86 of Volume I of Collecting the Edged Weapons of the Third Reich for a photograph of this rare part! Near MINT (15969) $145.

1st Model Luftwaffe Dagger Scabbard Fittings.

• MINT (eyelet--used to attach scabbard rings; nickel) (11766) $15.@
• MINT (upper w/ring; aluminum) $25.@
• MINT (center w/ring; aluminum) (6090) $25.@
• MINT (center w/ring; silver) (6091) $40.@
• MINT (center w/o ring; aluminum) (17381) $18.@
• MINT (lower; aluminum) $25.@

1st Model Luftwaffe Dagger Scabbard Fittings.
Exc++ (Upper, silver w/dark patina, tapped for staples as used w/early DLV/1st model Luftwaffe dagger) (19521) $45.

1st Model Luftwaffe Dagger Scabbard Runners.
Metal runners show surface age. Limited quantity. Exc+, Unissued (15858) $25./Pr.

NEW! 2nd Model Luftwaffe Dagger Scabbard.
Blued steel scabbard retains virtually 100% of the factory with superb detail to the pebbled panels and oak leaf motif suspension bands, with one tiny pin-prick depression to the lower right edge. The scabbard throat is retained by two headless, flush-mounted screws. EX++/Near MINT (26109) 395. SOLD

2nd Model Luftwaffe Dagger Scabbard Fittings.

• MINT (scabbard rings; aluminum) (17695) $8.@
  

Miniature 2nd Model Luftwaffe Dagger Scabbard.

• Exc. (silver; SMF pattern; w/o bands/rings; minor dent) (11435A) $65.
  

Miniature 1st Model Luftwaffe Dagger Scabbard Stamping Die.
This original stamping die was obtained from a relative of the owner of the Paul Seilheimer factory. 2-piece steel stamping die for production of miniature 1st model Luftwaffe dagger scabbard is approximately 5-5/16" in length. Die is hand-lettered in white paint, "EF. Nr 186, Dolchscheide EF 186, LUFTWAFFE". Exc+ (18152) PRICE ON REQUEST

Navy Honor Dagger Scabbard Shells. Brass scabbard comes in two halves which have not yet been braised together and is decorated on both sides with oak leaves and acorns in repoussé technique (embossed from inside) with a repoussé fouled anchor between the wide oak leaf embellished scabbard bands. Scabbards are without lower ball fitting. Two pairs available. MINT, Unissued (21897) $850./Pr.

1st/2nd Model Navy Dagger Scabbard Shells. Brass scabbard comes in two halves which have not yet been braised together and features a hammered motif throughout. Scabbard is without lower ball fitting. One pair available. MINT, Unissued (21898) $95./Pr.

1st/2nd Model Navy Dagger Wooden Scabbard Runners. Original, old stock runners can be trimmed to fit as necessary. Sold only as pairs. MINT/Unissued (24406) $18./Pr.

1st/2nd Model Navy Dagger Scabbard Runners.
Heavy brown cardboard runners which can be trimmed to fit as necessary. Few pairs available. MINT, Unissued (17727) $15./Pr.

Naval Officer Dagger Scabbard Screws.
Brass construction. With or without head available. MINT (With head, used w/lightning bolt scabbard) (5474A) $6.@ MINT (Headless, used w/hammered scabbard) (5474B) $6.@

Naval Officer Dagger Scabbard Suspension Band Eyelet.
Original brass, left-over wartime stock shows only age patina. MINT, Unissued (16995) $10.@

Imperial/Weimar Naval Dagger Scabbard Suspension Band Eyelet.
Original brass, left-over stock shows only light age patina. Slightly narrower than Third Reich scabbard eyelets. Limited quantity! MINT, Unissued (17976) $10.@

Rare 1919 Navy Dagger Scabbard Suspension Band w/Ring. Polished brass, rope-pattern figure eight style suspension band (shackle) is complete with ring and is made to be removable from the M-1919 pattern bayonet style scabbard. Rare part! Only two available. MINT (20677) $150.@

Post-War Diplomatic/Government Official Dagger Scabbard
Quality post-war production scabbard with 100% of factory finish on pebbled shell and correct oak leaf scabbard suspension bands. (19711) MINT $495.@

• MINT (19711A) $495.@
• Exc. (Lesser quality item w/incorrect suspension band eyelet) (19711B) $95.
  

Red Cross Officer Scabbard.
Pebbled finish; rectangular scabbard band holes.

• Exc+ (Dent-free, minor wear and age) (17914)$420.
• Exc+ (Dent-free, few specks of lifting) (16334) $420.
• Exc. (Nickel-plated, dent-free, some lifting to plating on lower edge) (15428) $395.
• Good (Lifting to plating, missing the throat) (16824) $115.
  

Red Cross Officer Scabbard Lead Weight.
Fits in lower scabbard to maintain proper carrying position. Only TWO (2) available. Unissued (15298) $18.50@

Red Cross EM Dagger Scabbard. None available at this time.

Red Cross EM Scabbard Screws.
MINT (9020) $5.@

RAD EM Scabbard Screws.
MINT (unplated) (4544) $4.@ MINT (aluminum) (8822) $4.@

Hitler Youth Leader Dagger Scabbard Leather.
Black leather suitable for Hitler Youth Leader dagger. Enough to cover one dagger. $65.@

Hitler Youth Knife Scabbard Shell. Steel scabbard shell retains 100% of original black enamel; is without scabbard runners or leather hanger/belt loop. Minor age to paint.
Near MINT, Unissued (20743) 40.@ ALL GONE

RLB Officer Dagger Scabbard Leather.
Black leather suitable for RLB Officer dagger scabbards. Enough to cover one dagger. $65.@

RLB Officer Dagger Scabbard Upper Fitting. Silver-plated upper scabbard fitting is complete with suspension ring and has been tapped for screws. Light surface wear. Near MINT (20819) $95.

1st or 2nd Model RLB EM Scabbard w/Hanger. Dent-free steel scabbard retains approximately 98% of the original black enamel showing light surface crazing with some minor lifting to enamel adjacent to upper edge of lower fitting. Dent-free nickel-plated lower fitting shows light surface wear with no lifting and is complete with both unturned flush-mounted retaining screws.

• Exc+/Exc++ (Dent-free scabbard w/100% of repainted black enamel; complete w/EX+/EX++ black leather hanger w/riveted lower nickel-plated fitting & early nickel-silver Assmann/D.R.G.M. marked clip)(23995) $650.
  
• Exc+/Exc++ (Complete w/exc+/exc++ black leather hanger w/riveted lower nickel-plated fitting & gray metal Assmann/D.R.G.M. marked clip) (22836) $650.
• Exc/Exc+ (Dent-free w/85% of black enamel w/uniform surface wear/scratches to scabbard and plated fittings w/one spot of lifting to reverse lower fitting and to Assmann/DRGM marked hanger clip. Light age to leather hanger) (23279) $595.SOLD
  

RLB EM Dagger Scabbard Lower Fitting.
Nickel-silver, left- over Solingen stock. MINT (6677) $38.50@

RLB/Postal Scabbard Lead Weight.
Fits in lower scabbard to maintain proper carrying position. Unissued (15297) $18.50@

RLB Dagger Scabbard Screws.
Unplated, headless screws. MINT (5638) $6.@

Land Customs Dagger Scabbard Fittings.
Silver fittings with dark age patina consist of upper throat/band with ring, center band with ring and lower end fitting. Fittings have not been tapped for screws. Sold as a set. Only TWO sets available. MINT (15961) $165./Set

Land Customs Dagger Scabbard Fittings.
Nickel-plated fittings show only minor storage wear and consist of upper throat/band with ring, center band with ring and lower fittings. Fittings have been tapped for screws. SET - Near MINT, Polished aluminum, Unissued (17048 - 4 avail.) $135./Set LOWER fitting only, UNTAPPED. MINT, unissued $40.@

Unfinished Land Customs Dagger Scabbard Fittings.
THREE (3) upper, FIVE (5) center and THREE (3) lower scabbard fittings show casting seams. Upper & center fittings have not been drilled for scabbard rings. MINT (13533) $15.@

Unfinished 1938 Bahnschutz Scabbard Shell.
Scabbard comes in two halves which have not yet been braised together and are complete with lower fitting. Scabbard halves are dent-free but do show some surface rusting. Rare part, first time offered. Exc., Unissued (17608) $165./Set@

1938 Bahnschutz Leader Dagger Scabbard Lower Fitting.
Plated aluminum fitting is the decorative type with scroll work design that was soldered to the lower end of the scabbard shell. Near MINT (16657) $45.@

Postal Dagger Scabbard Screw.
Unplated, headless screws. MINT (5638) $6.@

Hirschfanger Scabbard Shells.
Black leather scabbard shells w/provisions for skinning knife; measures 12-1/2" (l) x 1-1/4" (w) at throat without fittings. Leftover Solingen stock. MINT (16917) $145.@

Forestry/Hunting Scabbard Fitting Retaining Pin.
Brass, staple-type pin. MINT (6019) $6.@

Hunting/Forestry Scabbard Frog Lug.
Solid brass acorn- shaped lug with attaching shaft. These were attached to the upper scabbard fitting and used to retain the V-notched frog. MINT (17696) $15.@

Set of Rifle Association Dagger Scabbard Fittings.
Silver plated upper and lower fittings.

• MINT (Untapped for staples) (7075) (16024) (16238) $195.@
• MINT (Lower fitting only, numbered "14" and tapped for staple) (18412) $75.
  

Deluxe Silver Upper and Lower Hirschfanger Scabbard Fittings.
Heavily patinaed silver fittings show a quail within a deluxe panel on the lug on the upper fitting. Lower fitting features decorative bottom ball.

• MINT (upper only) $50.

Deluxe Silver Upper and Lower Hirschfanger Scabbard Fittings. Heavily patinaed silver fittings show a quail within a deluxe panel on the lug on the upper fitting. Lower fitting features decorative bottom ball.

• MINT (upper only) (14150A) $50.@
• MINT (lower fitting only) (16239) $45.@

Brass Upper & Lower Hirschfanger Scabbard Fitting. Brass fittings feature an acorn-style lug on the upper fitting with decorative ball on lower fitting.

• Upper fitting only (20697B - 2 available) $50.@

Standard Silver Upper and Lower Hirschfanger Scabbard Fittings.
Frosted silver fittings feature acorn style lug on upper fitting. Have not been tapped for staples. MINT (16239) $95.

Scabbard for the F.W. Herder "Schliessmesser" (Folding Knife).
Black leather scabbards feature a tongue on the reverse which attaches to the belt and are available in 7" and 8" lengths. Stamped on the obverse with the Herder trademark. See p. 160 of Volume IV (2nd edition), Collecting the Edged Weapons of the Third Reich for a photo of a similar scabbard. Near MINT (12676 – 2 available) $145.@

Leather Boot Knife Scabbard.
These brown leather scabbards are original, leftover WWII stock from the E. & F. Hörster firm and feature a tongue on the upper obverse which attaches to the waist belt. One each available in lengths of 5 3/4", 6-1/2", 6-3/4" and 7-3/4". Rare, original scabbards in MINT condition. MINT, Unissued (17225) $65.

Leather Boot Knife Scabbard.
Black leather scabbard measures 8 1/4" in length and shows only minor age with perfect stitching on reverse. MINT, Unissued (17725) $50.

Sword Scabbard Ring.
Nickel-silver plated construction. MINT (10003 - 2 available) $15.@

Wooden Sword Scabbard Runners.
Runners measure 34" in length but can be cut to fit shorter sword and dagger scabbards. Sold Only in Pairs. MINT (15706) $20./Pr.

Sword Scabbard Screws.

• MINT, Unissued (nickel-plated; will fit Eickhorn, Hörster, WKC scabbards) (6802) $6.@
• MINT, Unissued (black, anodized; will fit Seilheimer scabbard) (11459) $5.@
  

Luftwaffe Sword Scabbard Shell.
Blue leather-over-steel shell. 31-5/8" length. MINT $140.@

Naval Sword Scabbard Fittings.
Upper, center and lower brass fittings are correctly engraved but are without suspension eyelets or rings, and have not been drilled for retaining pins. (17974)

• MINT, Unissued (3-piece set) $85.@
• MINT, Unissued (upper only) $30.@
• MINT, Unissued (center only) $30.@
• MINT, Unissued (lower only) $30.@
  

Naval Sword Scabbard Suspension Band Eyelet.
Original brass, left-over stock shows only light age patina. Have not been ground to fit curvature of scabbard fitting. MINT, Unissued (17975) $10.@

Navy Sword Scabbard Fitting Retaining Pin.
Brass, staple-type pin. MINT (6019) $6.@

Kinder Sabel Scabbard.
Available in black painted or chrome finish with one or two scabbard bands/rings.

• MINT (chrome w/1 or 2 bands/rings) (9782) $195.@
• MINT (black w/1 band/ring) (9781) $175.@
• MINT (black w/2 bands/rings (9783) $175.@
  

RARE 1919 Pattern Navy Dagger Scabbard Suspension Band. See pages 72-75, upper, of Collecting the Edged Weapons of Imperial Germany for an example of this style removable suspension band. Cast brass "figure 8" rope pattern suspension band is complete with rope pattern ring. Rare part which many 1919 Pattern Navy daggers are missing. See page 75, top, of the Johnson/Wittmann Imperial reference for a photograph of this rare part! Exc++ (20391) $195.

WWII Pioneer Saw Leather Scabbard.
This rarely seen black leather scabbard measures 21" (53cm) in length. Reverse is maker marked and dated "1942". It is also Waffen-Amt. Pioneer saws are rarely found with their original scabbard. This item was veteran-acquired. Exc+ (8357) $85.SOLD

Short KS/98 Bayonet Scabbard.
Dent-free, steel scabbard measuring 8 ½” in length retains 100% of black enamel, but has not been fitted with throat or runners, nor tapped for screws. TWO available. MINT, Unissued (19502) $65.@

KS/98 Bayonet Scabbard Throat w/Runners. Unpainted scabbard throat with plated steel riveted runner measures 7 5/8" long and requires a scabbard with a minimum width at top of 1 3/8". Two sets available. Near MINT (20361) $50.@

NEW! Municipal Police Scabbard w/Frog. Black leather scabbard measuring 29cm in length shows light surface wear with no creases, rips or tears, and no damage to the reverse stitching. Dent-free, nickel-plated scabbard fittings show light surface wear/age patina, but no damage to the lower ball, and are complete with both retaining staples. Reverse upper scabbard fitting is without Municipal Police markings, however upper surface of throat is stamped, "6". Unmarked brown leather, triple-stitched frog grades EX+ showing light wear with an area of loose stitching on the upper left corner of the suspension pocket adjacent to lug hole. EX+/EX++ (25494) $695.

Police Bayonet Scabbard Upper Fitting.
Nickel-silver fittings are complete with bayonet frog stud. 4 available--2 have been drilled for retaining staple. Near MINT (15821) $45.@

Police Bayonet Scabbard Fitting Retaining Screws.
Unplated headless steel screws used to attach fittings to leather Police bayonet scabbards. MINT, Unissued (17530) $3.@

Metal Runner Retaining Rivets.
Small rivets w/head for attaching scabbard runners to throat. MINT, Unissued (17529) $3.@